Monthly Archives: February 2017

Electrical Safety at Home: Safety Rules to Follow

Electrician in WellingtonYou use electricity every day, so it’s easy to forget that it could be potentially dangerous when taken for granted. Unfortunately, this is when electrical accidents could happen. Observe the following safety rules to stay safe and prevent electrical accidents:

  • Make sure that your hands are dry when touching electrical sockets or appliances. Keep in mind that water is a powerful conductor, which means that to minimise the risk of electric shocks, you should keep all appliances and cords dry and free of water, both outside and inside.
  • Ensure that all cords are in great condition prior to using them. See if there are exposed or damaged wires, broken, cracked, or frayed plug tops or sockets. If there are, replace them properly or have them repaired by a licensed electrician as soon as possible.
  • Use residual current devices (RCDs) in bathrooms, kitchens, spas, pools, laundry, garage, and other damp areas in your house, or when you’re working outside with electrical equipment. RCDs keep track of electric currents that flow along an electrical circuit. If it senses a current being diverted elsewhere, like through a person, it will cut off power instantly to prevent a potentially fatal electric shock.
  • Check if the plug on your outlets fit properly. Otherwise, replace accordingly because loose contact is extremely unsafe.
  • Restrict the number of appliances you plug into an extension cord or outlet to prevent overloading, advises Adam Tulloch and other licensed residential electricians in Wellington. They added that you should never use more than one heater for every outlet.
  • Unplug or switch off all appliances when not in use and use safety devices like RCDs, shrouded plugs, as well as shuttered and recessed sockets.
  • When you change fuses or perform DIY electric work at home, or if there’s an electrical issue, turn off the main power switch to disconnect power. Go for the most up-to-date electrical safety products when you rewire or renovate your house, as well.

Always hire a professional electrician for repairs you’re not 100% confident of doing on your own. This is to make certain that the work would be according to legal safety standard regulations. Check if the electrician has a practising license and ensure that you obtain a Certificate of Compliance for work performed on fittings and installations.

Electrical Safety at Home: Using Extensions Cords Safely

Extension Cords in Wellington Extension cords are practical tools when you need that extra length for your new lamp, Christmas lights, or any DIY project. Every year, however, thousands of people worldwide suffer from injuries associated with extension cords — from tripping to electric shocks and fires. The thing is a majority of these electrical accidents could have been prevented.

Here are some guidelines for checking and caring for your extension cords to avoid potential fires, electric shocks, and other related injuries:

  • Extension cords with damaged or cut insulation as well as broken plugs that expose live parts could present potential electric shock or fire hazards. Get a replacement and don’t use that cord anymore.
  • All extension cords in use should be cared for and checked on a regular basis for potential deterioration or damage. Every time you plug in an outdoor tool or appliance, you must inspect both the appliance and the extension cord. Never disconnect the cord from the source, always pull it out using the plug because that’s what it’s intended for.
  • Take note that extension cords only serve as temporary solutions, meaning that you shouldn’t use them as permanent or long-term electrical connections. Never place them under furniture or rugs, or string them through floors, doorways, ceilings, or walls.
  • When exposed to prolonged periods of volatile outdoor conditions, extension cords would eventually deteriorate. Regardless if an extension cord is rated for outdoor or indoor use, store it inside your home when not in use.
  • Every time you use an extension cord outdoors, you must always use an isolating transformer or a residual current device (RCD), recommends an electrical testing and repair expert in Wellington. These devices would help safeguard you against electric shocks.

Keep in mind that regardless if you’re using the cord or not, if it’s plugged into an electrical source, it’s still live and conducting electricity. To avoid electrical safety hazards, you should unplug, turn off, and keep extension cords safely. In addition, when you purchase new leads, go for those with advanced safety features like transparent plugs and recessed sockets to help lower the possibility of electrical accidents occurring.

How to Get Rid of Tree Stumps in Your Backyard

Stump grinding in Tauranga with Tree Fellers
Cutting down a tree is easy. It’s what you do with the leftover stump that can become challenging.

There are quite a few reasons you might want to get rid of tree stumps. For one thing, if you want a wide, clear backyard, a few stumps dotting the landscape can get in the way. Also, they are not exactly the most pleasant things to see in your backyard.

Tree stumps with weeds and grasses growing over them can pose a hazard to people who might trip over or stub their toe on them.

There are many ways to take out a tree stump. Some require a lot of effort but not a lot of cash, others offer convenience, and others only require a little bit of creativity.

1. Dig it out.

The most effective way to remove a stump is also the most labour-intensive. Digging out a stump requires a lot of energy and enthusiasm. You’ll need a boatload of spades, picks, pruning axes, and a huge crew if you want to get the job done.

2. Speed up the decomposition process.

Allowing the stump to rot takes several weeks to a few months, but you won’t have to expend a lot of effort for  this method. Drill holes around the perimeter and the centre of the stump and fill them with potassium nitrate before covering with water. You can chip off pieces of wood or simply wait for the stump to die away.

3. Have a professional take it out.

In Tauranga, NZ, you can hire a stump grinding service to take care of old stumps for you. Most tree removal services do not remove the stump, so the experts at Tree Fellers recommend that you find professionals who specialise in getting rid of stumps using a tool called a stump grinder.

4. Make it part of your landscape.

You don’t have to remove tree stumps. Give your garden a unique twist by reusing old stumps. You can create a bird feeder or a unique planter by hollowing out the centre and drilling holes and chipping off pieces of wood. To prevent the stump from decaying, cover it with a coat of varnish.

Once you remove old stumps, you can go ahead and make the space part of the landscape. Cover the holes with topsoil, grass seeds, and mulch hay. Water regularly until grass has filled the area. You can choose to just keep the new grassy spots clear, or you can use it for whatever purpose you intend.

Tent Consultation Before the Event

Tent Rentals When planning for any event in Minneapolis, whether corporate or not, you have to put a proper consideration on which tent type to use. You do not want frustrations during an event, such as leaking tents or sagging when the sun’s heat overwhelm it.

The kind of tent you end up choosing will depend on various factors, including the function, longevity, season of the year and the number of people that you will be expecting to come.

Before you choose a tent from a party rental company, there are some things you have to keep in mind to make wise decisions.

Venue Visits

Having a consultation about which tent to pick over the phone is okay. Nevertheless, having the tent experts visit the ground first would be best. This is because they can estimate what kind of tent would best fit your location. Likewise, they need to determine the weather conditions before deciding on which type of tent you need.

Note that you have to ensure that you give the company a call before so that you can book an appointment with them. An email would also be useful.

Number of People

If it is a large event, then a massive dome would probably work best. Give them the estimated attendance. Ensure that the number you provide is a higher value so that they can pick the best-needed tent. You do not want people to crowd inside the tent. This would make the tent stuffy and uncomfortable for your visitors.

Cost of Tents

You do not want to run out of money at the last minute. Consultation helps you know which tent best fits your budget. You will end up picking an appropriate tent for your event. Also, it gives you enough time to plan your budget.

Going the extra mile to get a quality tent will ensure you enjoy your get-together party or family event. Ensure you budget for the tent rental fees, and make ample advance arrangements to avoid disappointments.

Why Delayed Projects are a Big No-No in the Construction Industry

Delay is one of the greatest enemies of efficiency in any workplace. It slows down Construction Delayswork and ruins projected plans. The stakes are higher with a construction project; the cost of delayed delivery of construction projects may lead to contract termination or lawsuits between owners and contractors.

Ensuring that a building project proceeds with little to no delays is not that easy to achieve. It requires coordination and professionalism throughout the process. Here are a few factors you need to consider.

Hiring the Right People

The heightened consequence of delays in a construction setting makes it more necessary to hire a construction company with an intensive knowledge of the industry and has the expertise of all the steps in the building process. Form Direct states that high-quality and reliable concrete construction supplies and equipment in every construction project are also vital to warrant there will be no unforeseen problems in the process.

Taking in the right people is so important that the Australian government recently announced that it would be establishing the Critical Infrastructure Centre to ‘protect vital national infrastructure from sabotage, espionage and coercion,’ Reuters reported.

Perpetual Balance Act

Any project manager can attest that there should always be a balance of three components for a project to work out: time, quality, and cost. However, there is an innate quality of these three factors that makes it hard to improve one thing without compromising the other. For example, speeding up the construction means you have to spend more on additional resources.

Cutting back on the cost, on the other hand, might jeopardise the quality of the project.  Additionally, if you try to add more features and improve the function of a construction project, it takes a toll on time and budget.

Although it is a laborious and complicated process, a good project manager finds a way to advance these three factors without sacrificing the other.

Delayed construction projects can be very costly and, in some cases, may lead to lawsuits. To avoid this, you should hire the right people, have an excellent project management and reliable equipment.

Why Delayed Projects are a Big No-No in the Construction Industry

Delay is one of the greatest enemies of efficiency in any workplace. It slows down Construction Delayswork and ruins projected plans. The stakes are higher with a construction project; the cost of delayed delivery of construction projects may lead to contract termination or lawsuits between owners and contractors.

Ensuring that a building project proceeds with little to no delays is not that easy to achieve. It requires coordination and professionalism throughout the process. Here are a few factors you need to consider.

Hiring the Right People

The heightened consequence of delays in a construction setting makes it more necessary to hire a construction company with an intensive knowledge of the industry and has the expertise of all the steps in the building process. Form Direct states that high-quality and reliable concrete construction supplies and equipment in every construction project are also vital to warrant there will be no unforeseen problems in the process.

Taking in the right people is so important that the Australian government recently announced that it would be establishing the Critical Infrastructure Centre to ‘protect vital national infrastructure from sabotage, espionage and coercion,’ Reuters reported.

Perpetual Balance Act

Any project manager can attest that there should always be a balance of three components for a project to work out: time, quality, and cost. However, there is an innate quality of these three factors that makes it hard to improve one thing without compromising the other. For example, speeding up the construction means you have to spend more on additional resources.

Cutting back on the cost, on the other hand, might jeopardise the quality of the project.  Additionally, if you try to add more features and improve the function of a construction project, it takes a toll on time and budget.

Although it is a laborious and complicated process, a good project manager finds a way to advance these three factors without sacrificing the other.

Delayed construction projects can be very costly and, in some cases, may lead to lawsuits. To avoid this, you should hire the right people, have an excellent project management and reliable equipment.

Seawall Construction: 3 Questions You Should Ask Your Contractor

Seawall Construction Be it a beach resort or a holiday home, a property near the sea is prone to natural disasters such as tsunamis. This the reason construction experts always recommend the building of seawalls in coastal areas. If you’re in charge of this project, you need to find a contractor that can perform the job efficiently. After all, the lives of the people, as well as their properties, are at stake once the seawall fails to function as it should.

Here are questions you can ask a seawall builder to determine if the company is right for the job:

  1. Have you worked with several seawall materials?

According to Underwater Construction Corporation, seawalls can be made of a variety of materials. There are seawalls made of wood, concrete, natural stone and vinyl sheet pilings. Some areas may have a seawall made of a combination of different materials. But the question is which material is ideal for your area? A knowledgeable and experienced contractor can help you decide on that.

  1.  Who will obtain state and local permits?

As with any marine construction, you’ll need to secure county, local, and/or state permits for building a seawall. It would be better if your contractor can help you get these documents because you will need them to provide the technical requirements. Some contractors include the permits in their services, but others don’t. So, it would be best to ask this question before hiring one.

  1. Does the seawall construction come with service warranties and repairs?

Many contractors issue warranties with their seawall construction services. Apart from that, ask whether the materials come with manufacturer warranties. This way, you’ll know that the seawall can be repaired or replaced when it gets damaged by natural calamities.

With these three questions, you’ll be able to make an informed choice in your contractor. Just one more tip. If you want to know your contractor a bit more, check out its customer feedback online, so you’ll know whether you can trust your preferred contractor or not.