Monthly Archives: August 2015

If the Ski Helmet Fits, Wear It: Getting the Right Size and Fit

ski helmet and gogglesIf the Ski Helmet Fits, Wear It: Getting the Right Size and Fit
Your ski helmet is the only thing standing between you and a potentially dangerous—and even fatal—head injury. Your helmet should fit you perfectly to deliver optimal protection.

Getting the Right Ski Helmet Size    

Whenever possible, try on K2 helmets at a shop to find your size. It’s also best to bring your goggles or sunglasses along to see how they fit with a helmet. When shopping online, use a measuring tape to get your head measurements and compare that with the size indicated in the size chart.

Place the measuring tape roughly an inch above your eyebrows and above your ears. Measure around your head’s biggest portion to determine your head circumference.

Getting the Right Ski Helmet Fit

The best K2 ski helmet for you must feel snug and comfortable. Do a side-to-side shake with your head. If you feel the helmet rocking along with you, it’s too loose. If it shifts, you need a smaller size, or thicker pads.

Try adjusting the sizing mechanism. Push up both back and front edges and tighten straps if you feel the edges moving. Your helmet must be about an inch above your eyebrows to protect your forehead.

You shouldn’t see any gaps between the lining of the helmet and your head. Similarly, you shouldn’t see gaps between your helmet and your goggles. Position the helmet comfortably to avoid the goggles from pushing down or blocking your vision.

In addition, your ski helmet’s buckle or chin strap must fit snugly to keep it in place during impact. The strap must be sufficiently loose, but fit snugly. It shouldn’t feel like it’s choking you.

Remember that while ski helmets are very durable, they are not indestructible. K2 helmets can aid in reducing the risk of many potential head injuries, but they offer limited protection. Always be mindful of your movements to avoid accidents.

Garage Door

Problems with the Garage Door? Clues You Must Watch Out For

Garage DoorIt is obvious when your garage door opener is malfunctioning. No matter how many times you press the button, the door does not close or open. This is one of the most common problems Salt Lake City residents experience with their garage doors.

In some cases, the fix is quite simple. You can do a quick inspection before you start panicking. There are also several clues to determine what the problem is.

Here’s what you need to watch out for:

Blinking or Lack of Blinking LED Light on the Remote

Most of today’s garage door remote controls have an LED that lights up every time you press a button. These also light up in a pattern when there is a problem with either the remote or the garage door opener itself. Take note of the pattern and check your instructions manual for the corresponding meaning. If the LED does not light up at all, it may mean that your remote’s batteries are dead.

Dead Garage Door Batteries or Damaged Wires

When you are able to rule out the remote as a culprit, the next thing to do is to check the garage door opener’s batteries. Replace them if possible.

For wired garage doors, check the cables and cords for any damages. These might have been torn, split, burnt, or exposed. In such cases, it is best you call your local Salt Lake City garage door opener repair, as damaged wires can be dangerous. Fixing the problem yourself, without any prior experience or proper equipment, may lead to serious injuries or electrocution.

Blocked Sensors

Some modern garage door openers are equipped with safety sensors. The door will not open or close when there is something obstructing the sensor. Check if there is anything blocking the path of the sensor.

When you experience any problem with your garage door, don’t panic right away. Professional garage door technicians will help you apply the appropriate solution to your problem.